|
Ethernet Layer2/Layer3 Protocol Development/Manager-DCE/IP/ADX
Design and implement networking routing/switching protocol software for high end networking systems.
· C and Linux software environments for high end CPUs and network Processors.
· Routing and Bridging Protocols – STP, MSTP, RSTP, ARP, OSPF, BGP, VTP, VLAN.
· VRRP, VSRP, MRP, BFD, PBR, GRE, VRRP, OSPF V2, OSPF V3, BGP, BGP+, IPV6.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 15 years relevant experience
Platform Software Development-DCE/Storage
Experience in Linux device drivers development for enterprise class chassis environment
· Linux 2.6 Kernel drivers for PCI, I2C, Blade Drivers, FPGA/ASIC drivers.
· Boot Loaders, BSP, UBOOT.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 10 years relevant experience
L2/L3 Forwarding-IP/ADX/DCE
Design and implementation of packet forwarding. Enhance application level functionalities and features for networking platforms.
· Development experience in TCP/IP stack, VLAN, MAC Mgr, VPLS, VLL, Pseudo wire.
· Mac in Mac, GRE, MPLS Tunneling, Layer-2 packet switching, L2VPN.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 10 years relevant experience
SNMP Development-DCE/IP/ADX
Design and implementation of SNMP MIB for L2/L3 and L4/L7 switching platforms.
· Development experience in CIM, SNMP, WMI and building CLI’s.
· Managing activities on SMI-S.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 5 to 10 years relevant experience
L2/L3 Test Engineer-DCE/ADX/IP/FVT
· Testing routing protocols (BGP, OSPF, IS-IS,MPLS, VPLS, etc) and L2 protocols( VLAN, STP, flavors of STP, PVST,LACP etc)
· Testing network features: .1x, ACLs, QoS, CoS, Traffic shaping, Queuing on an L2 and L3 switches.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 15 years relevant experience
|
ASIC Design/Verification/Physical design – Hardware
Develop ASICs for Brocade’s IP and FC switches.
· ASIC architecture, modeling, RTL, verification and synthesis.
· Floor planning, P&R, Timing analysis
Languages: Verilog, C++, System Verilog, Perl.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 6 to 12 years relevant experience
Network System Software Engineer-HBA
As a key contributor in 10G Ethernet Device Driver Development responsible for developing device drivers, ASIC drivers and maintenance.
· Hands on experience in either of Windows or Linux kernel & device drivers. Should have specifically worked on Ethernet drivers.
· Must have worked with embedded software components such as boot loaders, board support packages, device drivers and kernel modules.
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 10 years relevant experience
Storage Protocol & Applications-Storage
Firmware development experience in real time embedded environment in one of the following areas.
· Must have working knowledge of storage protocols (SCSI, FCP).
· Boot Loaders, BSP, UBOOT.
· Exposure to one or multiple Storage applications (Eg: Multipathing, Disaster Recovery, Replication, Volume Managers)
Qualifications: E/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 10 years relevant experience
Networking Technolgies & Applications –Storage
· Experience working in real-time kernel/embedded Unix in a multi-threaded environment and operating system internals.
· Exposure to Networking protocols is a added advantage (Eg: IPv4/v6, MPLS, TRILL, IS-IS, BGP, OSPF, L2/L3 forwarding infrastructure, switching)
Qualifications: E/BTECH/ME/MTECH/MS in CS/EE/ECE along with 3 to 10 years relevant experience
|
Channel Sales Representative-Delhi
- Responsible for driving the sales, presales & service teams of the OEM, MR & channel partners for achieving business goals (revenue, products, market share,etc.)
- Engage with OEM, MR & channel partners and leverage them to increase coverage.
- Responsible for increasing the strategic value of the "Brocade brand" in the market
- Operate as key point of contact for all Brocade business related issues
- Build & maintain key high level customer & partner relationships (Average weekly 60% of time in front of enduser customers and 40% with partners)
Qualifications: BE/BTECH/ME/MTECH/MS in CS/EE/ECE along with 10-12 years relevant experience
JAVA/J2EE Development-DCM
· Strong hands on experience with Java client and server side technologies, J2EE technologies such as JMS, JNDI, RMI, EJB etc. and new frameworks, multi-threaded programming, RDBMS and related technologies such as ODBC & JDBC, n-tier architecture.
· Solid understanding of object oriented design (OOD) and design patterns.
Qualifications: E/BTECH/ME/MTECH/MS in CS/EE/ECE along with 6 to 9 years relevant experience
We have multiple openings for all the above positions.
|
